Grass Valley K2 Storage System Instruction Manual v.3.2 Sep.24 2007 - Manual (Page 644)

644 K2 Storage System Instruction Manual September 7, 2007
Chapter 13 Installing the Nearline 10 Storage System
quickly, at a rate of about 2 blinks per second. Do not hold down the power button
for longer than 15 seconds.
The power button on the RAID controller turns off power for the primary RAID
chassis and any connected Expansion chassis. Power-off normally occurs within
20 seconds and is indicated when LEDs other than those on the power supplies go
off and the fans stop rotating.
6. Wait for RAID power-off to complete before proceeding.
7. Power-off all Ethernet switches.
8. Power-off the control point PC and/or the NetCentral server PC, if necessary.