Grass Valley K2 Summit Storage Area Network v.7.1 - Manual (Page 347)

347 K2 Storage Area Network Installation and Service Manual 26 October 2009
Chapter 8 Configuring K2 clients on the K2 SAN
application. A login dialog box opens.
2. Log in to the K2 System Configuration application with the correct administrator
account. By default this as follows:
• Username: Administrator
• Password: adminK2
3. In the K2 System Configuration application tree view, verify that the K2 SAN is
correctly defined.You should see the correct number of K2 clients. If the correct
number of K2 clients is not currently added to the K2 SAN, you can add or remove
clients now (before clients are configured), as follows:
• To add a client, select the top node of the storage system and click the Add
Device button
• To remove a client, select an unconfigured K2 client and click the Remove
button.
4. Select the top K2 client.
5. Click the Configure button. The Configuration wizard opens. Follow the
on-screen text as described in the following table.: