Grass Valley Machine Control Interfaces V.12.0 - Manual (Page 108)

108 Kalypso Machine Control Interfaces Installation Instructions
Section 4 — Using the Encore Operational User Interface (OUI)
Shortcut Key Editor Buttons
Use the Shortcut Key Editor buttons to perform tasks:
How to Create a Shortcut or Macro
1. In the Shortcut Area, click the New button. A blank entry with the name
“None” appears in the Shortcut list on the left.
2. Click the Current Shortcut button. Enter the function key you want to
assign to the shortcut or macro (for example, F1, F2 etc.). Alternatively,
press the appropriate function key on your keyboard.
3. In the Action Area, click the New button. The system displays the Action
Box which has four buttons — from left to right, Record , Stop , Play and
Enter .
Shortcut List
Load — Load a shortcut list. The system displays shortcut lists from
which you can select the one you want to load. Note: The OUI saves
this setting when you switch off your workstation.
Save As — Save the current shortcut list with a new name.
Clear — Delete the current list.
Modify — Save changes to the list.
Shortcut
Current Shortcut — Assign a function key to a shortcut or macro.
New — Create a new shortcut or macro.
Delete — Delete the highlighted entry in the shortcut list.
Action
Action — Change the name of the shortcut or macro. Warning: If you
change the name of a macro, make sure you change the name to that of
an existing macro.
New — Record a new shortcut or macro.
Macro — Load a previously saved macro. The OUI displays the cur-
rently loaded macros in the Shortcut list in the left of the window.
Details — Displays a list of the actions in a shortcut or macro.