Grass Valley Machine Control Interfaces V.12.0 - Manual (Page 29)

Kalypso Machine Control Interfaces Installation Instructions 29
Section
2
Profile Interface
Introduction
The Profile interface software consists of:
• a VDRCS application (available as an option installed on the Profile
itself),
• a Sharer and a System Manager application, responsible for overseeing
the entire Encore control system network and to configure users and
their access to the network (provided on the Kalypso Software CD),
and
• a Port Mapper application (Base Install), used to manage system net-
working ports (provided on the Kalypso Software CD), and
• an Encore User Interface application (provided on the Kalypso Soft-
ware CD).
A Sharer and System Manager must be installed somewhere in your
facility to use Kalypso system machine control. However, only one
instance should be running on the network.