Grass Valley Machine Control Interfaces V.12.0 - Manual (Page 42)

42 Kalypso Machine Control Interfaces Installation Instructions
Section 2 — Profile Interface
3. Touch New Device in the Edit Device List pane, then select DDR as the
Device Type ( Figure 34 ).
Figure 34. Device Definition Data Entry Menu
4. Touch the Device Name data pad and enter the name you wish to use to
identify the device.
a. Enter Profile1-1 (no space with dash) for the first channel of a
multiple channel Profile system.
CAUTION The Profile Device Name entered here must exactly match the name used by
the Encore system for that Profile channel. The names above are commonly
used when an Encore system is configured, but may be different at your
facility.
b. Touch the Create button on the lower right. The next menu will
appear.