Grass Valley Machine Control Interfaces V.12.0 - Manual (Page 92)

92 Kalypso Machine Control Interfaces Installation Instructions
Section 3 — VTR Interface
Test Kalypso VTR Interface Operation
Test that the VTR can be controlled directly with the Kalypso system.
• Select a VTR to control on the PGM PST B bus (or whatever bus has
been delegated),
• Load a VTR into that machine
• Make sure the VTR is in remote operation mode, and
• Play, Stop, Fast Forward, and Rewind the tape using the Kalypso
Machine Control subpanel.
You have now completed the VTR interface installation and configuration
for Kalypso control.
Note You should now back up the Encore configuration files (see Saving Encore
Machine Control Configurations on page 25 ).