Grass Valley NewsQ Pro v.1.5 - Manual (Page 46)

Chapter 2 Installing and Configuring NewsQ Pro
32 Digital News Production
Setting Options Description
Enable 16-Port GPI
Interface On (checked)
Off (unchecked)
Check Enable 16-Port GPI Interrface to control the
NewsQ Pro software via GPI input.
GPI Input 1 through 16 Select the GPI input you are configuring.
Channel <none>
Channel 1 label
Channel 2 label
Channel 3 label
Channel 4 label
Channel 5 label
Channel 6 label
Not Channel Specific Select the GPI input channel.
GPI Function:
First
Second
Third
Select a function for each GPI input. Each input usually has only one function,
though each GPI can perform up to three functions.
<none> The GPI has no assigned function.
Play/Stop Plays or stops the current clip.
Recue Recues the current clip.
Cue Previous Cues the previous clip in the playlist.
Cue Next Cues the next clip in the playlist.
On-Air Only used with the First GPI function.
Sets the system to monitor an on-air signal. When
NewsQ Pro detects a signal, the channel window
becomes red to indicate the channel is playing to air.
When the clip ends, it goes into post roll for the
specified time and then freezes on the last frame
until the signal ends.