Newton control panel application installation, Installing newtonpc control panel application – Grass Valley Newton Modular Control System v.2.0 User Manual
Page 25
![background image](/files/814023/content/doc025.png)
Newton Instruction Manual
25
Newton Control Panel Application Installation
Newton Control Panel Application Installation
The NewtonPC software control panel application for the PC comes on a
CD-ROM along with the NetConfig networking tool and the Newton Panel
Configurator necessary for configuring panels.
Installation of the Newton software control panel is a process of installing:
•
Newton Control Panel application,
•
NetConfig Networking application, and
•
Newton Panel Configurator.
These software components are all included in the install process.
Installing NewtonPC Control Panel Application
Install the NewtonPC Control Panel software and additional components
on a networked PC as follows:
1.
Insert the NewtonPC CD-ROM into the CD drive in your networked
PC.
2.
The setup application should autorun when inserted. If not, locate the
NewtonPC1-Setup.EXE file in the NewtonPC folder and double-click
on it to start the installation.
3.
Read the Welcome screen and click on the
Next >
button (
).
Figure 6. Installation Welcome Screen