Enable router interface on newtonpc – Grass Valley Newton Modular Control System v.2.0 User Manual
Page 30
Advertising
![background image](/files/814023/content/doc030.png)
30
Newton Instruction Manual
Section 2 — Installation
Enable Router Interface on NewtonPC
To enter the License Key to enable the option on the NewtonPC software
panel, do the following:
1.
Open the application by double-clicking on the NewtonPC icon to
bring up the main application screen
2.
Right-click on the blue bar at the top of the application to bring up the
pulldown menu shown in
.
3.
Select the Options choice.
Figure 13. NewtonPC Router Interface Option Enable
Advertising
This manual is related to the following products: