Grass Valley Newton Modular Control System v.2.0 - Manual (Page 65)

Newton Instruction Manual 65
Panel Configuration
Soft Key Functions and Assignments
The twelve configurable soft keys on the left of the Newton rack mount and
software panel (
Figure 49 ) operate in conjunction with the Learn and Recall
buttons on the panel.
The Recall button provides the following functionality:
• Recall Channel Setup – soft keys will recall user-assigned setups when
the
Recall button on the panel is on (enabled).
• Setup Index mode – when the Recall button is off (disabled), the soft
keys will act as setup index keys. Refer to Soft Keys – Setup Index Mode
on page 68 .
• Recall Router Source on Monitored DST – when the Router Interface
option is enabled and a valid router connection is configured, a soft key
can be assigned to take a named router source on the Monitored Desti-
nation.
• Recall Monitored Router Dst – when the Router Interface option is
enabled and a valid router connection is configured, a soft key can be
configured to select a Monitored Destination.
The router functions can be used in conjunction with saved setups to
allow setup recall and simultaneous router switching from one soft key
press.
Figure 49. Soft Keys on Panels
Video
Proc
Sat
4
Video
Timing
Sat
5
Audio
Proc
Sat
6
Master
Control
Sat
7
Studio
Sat
8
Edit
Sat
9
Learn
Recall
Route
Mon
Enable
Ident NEWTON
MODULAR CONTROL
vciGain1
100.0
vciGain2
100.0
vciGain3
100.0
vciGain4
100.0
Router
8234_06
Soft Keys