Grass Valley Newton Modular Control System v.2.0 - Manual (Page 40)

40 Newton Instruction Manual
Section 3 — Configuration
Set Rack Mount Panel System Configuration
Select the Panel System link on the left of the Newton Panel Description web
page to bring up the Newton Panel System Configuration web page
(
Figure 23 ). The configuration will be the factory default values.
Figure 23. Newton Panel System Configuration Web Page
1. Type in the desired name for the panel in the Panel Device Name box.
2. Adjust the following parameters for the selected rack mount panel as
desired:
• Panel Blink Button Lamp Rate – currently not implemented.
• Panel Background Button Intensity – sets the LED intensity on the
panel for use in a dark environment.
• Panel Dim Button Intensity – currently not implemented.
• Panel Display Intensity – sets the brightness of the display.
• Panel Rotary Shaft Hysteresis – use this control to adjust the sensi-
tivity and smoothness of the panel knobs if required.
• Panel Console Baud Rate – currently not implemented.
3. Select the Save New Settings button to save your changes or the Cancel
Changes to return to the previous values.