Grass Valley Newton Modular Control System v.2.0 - Manual (Page 53)

Newton Instruction Manual 53
Panel Configuration
The Newton Panel area at the bottom of the Newton Panel Configurator
window shown in
Figure 37 allows a configuration to be sent to, or read
from, a panel present on the LAN.
When a panel is dragged and dropped to the Newton Panel area, the fol-
lowing information about the panel is displayed:
• Panel Name field– displays the name of the panel that has been dragged
and dropped into the parameter window.
• Panel IP Address field – lists the IP Address of the displayed panel.
• Send to Panel button – will download the current configuration to the
panel.
• Read from Panel button – will upload the configuration from the panel in
the display to the Newton Panel Configurator.
• Local Panel (NewtonPC) checkbox – checking this box will connect the
Newton Panel Configurator to the Newton software panel installed on
the resident PC running NetConfig. The IP Address shown is a loop-
back address from the local PC and should not be changed.
Figure 37. Newton Panel Area
Panel IP Address Panel Name Read from Panel
button
Send to Panel
button
Local Panel checkbox