Grass Valley UniConfi NVISION Series v.2.0 - Manual (Page 142)

132
Firmware
Uploading a Firmware File
Uploading a Firmware File
Firmware is saved in flash memory on the control card.
How to Upload New Firmware
1 Select a control card.
2 From the ‘Window’ menu, choose ‘Configuration’. The ‘Configuration’ window appears:
3 Click Read All. The ‘Configuration’ window populates with current router information.
The ‘Software Versions’ section shows all firmware files currently being used by the control
card.
4 Make a note of the part number (SVxxxx-xx) of the file(s) you want to replace.
S If you do not have the firmware files, you might have to request the files, by part number,
from Miranda. (Firmware files have the extension .mx.)