Grass Valley UniConfi NVISION Series v.2.0 - Manual (Page 18)

8
UniConfig Basics
The UniConfig Interface
You can also specify — using the check box — whether UniConfig will log communications
messages.
Set Router Type Command
If you are configuring an NV3128 or an NV3256 and the router has lost its device ID, use the ‘Set
Router Type’ command to restore the router’s device ID.
The command has two options:
Click the appropriate entry to choose your router. You must write the EEPROM of the router.
S The NV3128 and NV3256 (and NV3512) are obsolete. Miranda no longer sells these routers
and service in the field is limited. If you have one of these routers and want to write the
EEPROM, contact Miranda if you need instructions.
Tools Menu
The ‘Tools’ menu has two commands:
The ‘Options . . .’ command is present in certain contexts and absent in other contexts.
Options Command
In some contexts, the ‘Options’ command presents this ‘Configuration Options’ dialog:
These are general options.