Grass Valley UniConfi NVISION Series v.2.0 - Manual (Page 90)

80
Machine Control
The Port Configuration Window
The Port Configuration Window
This is the ‘Machine Control Port Setup’ window:
Click Read to read the port configuration from the router. The port data appear in the port list.
Click Write to save any changes to the port configuration that you have made.
Machine Control Port Commands
When you have the machine control port window open, the ‘Edit’ menu provides commands
that are appropriate to the machine control port window:
If you right-click anywhere in the machine control port window, a context menu appears that
has the same commands as the ‘Edit’ menu.
You can use these commands to change the port types of the router.
See Machine Control Ports on page 77.
Port List
Edit Menu Context Menu