Grass Valley PROFILE FAMILY v.2.5 - Manual (Page 234)

Chapter 6 Using Profile Utilities
234
Assigning an MPEG Decoder
The previous example assigns an MPEG encoder to a video input. By manually
adding the following lines, you can assign an MPEG decoder and connect it to
a video output.
// Manually edit these lines for Decoder
13-00 // index 18 - MpegDec#1 (Use 13-01 for
MpegDec#2, etc.)
18-02,CS // Schedule connect MpegDec#1 to
DComponentVideo1OutA (Play)
PortServer
PortSever allows you to control a Profile unit remotely using Ethernet
communications. For example, you can run PortServer on a remote Profile
system so that you can access it from a local Profile using your LAN. Simply
double-click the PortServer shortcut icon on the desktop to start it (or choose
Start | PDR Applications | PortServer ). The PortServer interface is shown in
Figure 113.
Figure 113. PortServer window