Grass Valley PROFILE FAMILY v.2.5 - Manual (Page 240)

Chapter 6 Using Profile Utilities
240
6. Restart the disk recorder in order for the microcode update to take effect. Use
the Fibre Channel Configuration dialog box or the fcconfig command to
verify that switch mode is on or off according to your needs. Each icon
establishes settings that should be appropriate for most uses.
Use the Fibre Channel Configuration dialog box or the fcconfig command to
verify that switch mode is on or off according to your needs. Each icon
establishes settings that should be appropriate for most uses.
Figure 116. The Update FC Microcode window