Grass Valley PVS Series System Guide v.4.0 Dec 10 200 - Manual (Page 144)

Chapter 5 Modifying a Channel: Video Settings
144 Profile XP System Guide July 27, 2001
5. Select the text options; Bright or Outline . You may want to experiment to discover
which text options are the best suited for your application.
6. Select text background using the Background drop-down. Choose Transparent or
Opaque .
7. Select another video monitor output to modify, or click Finish to saving your
settings.
Enabling Video Monitor timecode burn-in
You can enable timecode burnin on the Video Monitor outputs. Once enabled, you
must select a source of timecode for the Video Monitor output. To select the source
of timecode source, refer to Chapter 7, “Selecting the video output as a timecode
output for the channel,” on page 182.
To configure timecode burn-in:
1. Select Video Monitor in the Configuration Manager window. The Video Monitor
dialog box appears.
2. Click Next to navigate to Video Monitor page 2 of 2.
3. Choose a monitor output in the Video Monitor Setup list or click Select All .
4. Select the Show Time Code check box.