Grass Valley PVS Series System Guide v.4.0 Dec 10 200 - Manual (Page 183)

Selecting the video output as a timecode output for
July 27, 2001 Profile XP System Guide 183
4. Select SDI-VITC-Out in the Timecode Output list.
NOTE: The video outputs listed in the Timecode Output list correspond to those
assigned to the channel. For example, SDI-VITC-OutA-J7 is listed in the following
figure because SDI-OutA-J7 is selected as the video output for the channel. If you
change the video output for a channel, the Timecode Output list also changes.
5. Click Finish to save your settings and close the Channel Configuration dialog box.