HEIDENHAIN TNC 407 (280 580) ISO Programming - Manual (Page 202)

7-13 TNC 426/TNC 425/TNC 415 B/TNC 407
7 Programming with Q Parameters
1 0
Q
0
ENT
ENT
ENT
7.5 Checking and Changing Q Parameters
During a program run or program test, Q parameters can be checked and
changed if necessary.
Preparation:
• If you are in a program run, interrupt it (for example by pressing the
machine STOP key and the INTERNAL STOP soft key)
• If you are doing a test run, interrupt it
To call the Q parameter:
Q =
Select the parameter, for example Q10.
Q10 = + 100
The TNC displays the current value.
Change the Q parameter, for example Q10 = 0.
Leave the Q parameter unchanged.