HEIDENHAIN TNC 407 (280 580) ISO Programming - Manual (Page 309)

11-12
11 Tables, Overviews and Diagrams
TNC 426/TNC 425/TNC 415 B/TNC 407
TNC displays, TNC editor
11.1 General User Parameters
Graphic simulation without programmed tool axis: Tool radius
MP7315 0 to 99 999.9999 [mm]
Graphic simulation without programmed tool axis: Penetration depth
MP7316 0 to 99 999.9999 [mm]
Graphic simulation without programmed tool axis: M function for start
MP7317.0 0 to 88 (0: Function inactive)
Graphic simulation without programmed tool axis: M function for end
MP7317.1 0 to 88 (0: Function inactive)
Determine the TNC program memory to be occupied during blockwise transfer
MP7228.0 Minimum program memory to be used: 1 to 1024 [kilobytes]
MP7228.1 Maximum program memory to be used: 1 to 1024 [kilobytes]
Screen saver
Enter the time after which the TNC should start the screen saver
MP7392 0 to 99 [min] (0: Function inactive)
426
425 415 407