HEIDENHAIN SW 68894x-02 - Manual (Page 380)

380 ICP programming
5.5
Editing
ICP
cont
ours
Editing contour elements
The CNC PILOT provides various ways to change an existing contour.
The procedure is illustrated in the following example of editing the
length of an element. The other functions work similar to the
procedure described here.
The Manipulate menu provides the following functions for editing
existing contour elements:
 Trimming
 Length of element
 Length of contour (only for closed contours)
 Radius
 Diameter
 Change
 Contour element
 Form element
 Delete
 Element/Range
 Move element/range as well
 Contour/Pocket/Figure/Pattern
 Form element
 All form elements
 Transform
 Shifting a contour
 Contour rotation
 Contour mirroring: You can define the position of the mirror axis
by entering the starting point and end point or the starting point
and angle