HEIDENHAIN TNC 320 (340 55x-05) ISO programming - Manual (Page 291)

HEIDENHAIN TNC 320 291
1
0
.2 Defining DIN/ISO F
unctions
10.2 Defining DIN/ISO Functions
Overview
The TNC provides soft keys with the following functions for creating
DIN/ISO programs:
If a USB keyboard is connected, you can also enter the
DIN/ISO functions by using the USB keyboard.
Function Soft key
Select DIN/ISO functions
Feed rate
Tool movements, cycles and program functions
X coordinate of the circle center/pole
Y coordinate of the circle center/pole
Label call for subprogram and program section
repeat
Miscellaneous function
Block number
Tool call
Polar coordinate angle
Z coordinate of the circle center/pole
Polar coordinate radius
Spindle speed