HEIDENHAIN TNC 426 (280 476) - Manual (Page 459)

432 12 MOD Functions
12.5 Ether
n
et Int
e
rf
ace
NFS2: <Device name> (W) WRITESIZE LARGER THEN x SET TO x The value that you entered for DEFINE MOUNT, WS
is too large. The TNC sets WS to 4096 bytes.
NFS2: <Device name> (E) MOUNTPATH TO LONG The value that you entered for DEFINE MOUNT,
PATH is too long.
NFS2: <Device name> (E) NOT ENOUGH MEMORY At the moment there is too little main memory
available to establish a network connection.
NFS2: <Device name> (E) HOSTNAME TO LONG The name you entered in DEFINE NET, HOST is too
long.
NFS2: <Device name> (E) CAN NOT OPEN PORT The TNC cannot open the port required to establish
the network connection.
NFS2: <Device name> (E) ERROR FROM PORTMAPPER The TNC has received implausible data from the
portmapper.
NFS2: <Device name> (E) ERROR FROM MOUNTSERVER The TNC has received implausible data from the
mountserver.
NFS2: <Device name> (E) CANT GET ROOTDIRECTORY The mount server does not permit a connection with
the directory defined in DEFINE MOUNT, PATH.
NFS2: <Device name> (E) UID OR GID 0 NOT ALLOWED You entered 0 for DEFINE MOUNT, UID or GID 0.
The input value 0 is reserved for the system
administrator.
Error message Cause