SMA SB 1300TL - Manual (Page 50)

Power loss in night mode 0.1 W
Topology transformerless
Cooling method Convection
Degree of protection in accordance with
IEC 60529 IP65
Protection class in accordance with IEC 62103 I
Grid configurations TN-C, TN-S, TN-CS, TT (if V
N_PE
> 30 V), IT, Delta
IT, split phase
National standards and approvals, as per
10/2014* AS 4777, C10/11, CE, CEI 0-21,
EN 50438:2007, G83/2, IEC 60068-2,
IEC 61727, IEC 62109-1, IEC 62109-2,
NRS 097-2-1, PPC, PPDS, RD1699,
RD 661/2007, UTE C15-712-1, VDE-AR-
N 4105, VDE0126-1-1, VFR 2014
* RD1699: Contact the SMA Service Line for restrictions in specific regions.
NRS 097-2-1: This standard requires a separate label attached to the AC distribution board which
indicates the AC-side disconnection of the inverter in case of a grid failure (for further details, see
NRS 097-2-1, Sect. 4.2.7.1 and 4.2.7.2)
IEC 62109-2: In order to meet the requirements of this standard, use of the fault indication relay must
be activated in the inverter or there must be a link to Sunny Portal with the fault alert via e-mail activated.
Protective Devices
DC reverse polarity protection Short-circuit diode
Input-side disconnection point* Electronic Solar Switch
DC overvoltage protection Thermally monitored varistors
AC short-circuit current capability Current control
Grid monitoring SMA Grid Guard 2.1
Maximum permissible fuse protection 16 A
Ground fault monitoring Insulation monitoring: R
iso
> 1 MΩ
All-pole sensitive residual-current monitoring unit Available
* Optional
Climatic Conditions
Installation in accordance with IEC 60721-3-3, Class 4K4H
Extended temperature range −25°C to +60°C
Extended humidity range 0% to 100%
Extended air pressure range 79.5 kPa to 106 kPa
11 Technical Data SMA Solar Technology AG
Operating Manual SB13-21TL-BE-en-11 50