Yaskawa SI-EN3 Installation - Manual (Page 21)

5 Installation Procedure
YASKAWA ELECTRIC TOBP C730600 58B 1000-Series Option SI-EN3 Installation Manual 21
4.
Connect the ground wire (I) to the ground terminal (K) using one of the remaining
provided screws (H). Connect the other end of the ground wire (I) to the remaining
ground terminal and installation hole on the option (B) using the last remaining
provided screw (H) and tighten both screws to 0.5 to 0.6 Nxm (4.4 to 5.3 in lbs).
Figure 6
Figure 6 Connect the Ground Wire
Note: There are two screw holes on the drive for use as ground terminals (K). When connecting three
options, two ground wires will need to share the same drive ground terminal.
H
I
K
B
A1000
EtherNet_IM_E_conditional.fm 21 ページ ２０１２年１１月５日 月曜日 午前１１時３９分