Yaskawa SI-EN3 Installation - Manual (Page 29)

5 Installation Procedure
YASKAWA ELECTRIC TOBP C730600 58B 1000-Series Option SI-EN3 Installation Manual 29
4.
Connect the ground wire (G) to the ground terminal (A) using one of the remaining
provided screws (C). Connect the other end of the ground wire (G) to the ground
terminal and installation hole on the option using the last remaining provided screw
(C) and tighten both screws to 0.5 to 0.6 Nxm (4.4 to 5.3 in lbs).
Figure 13
Figure 14 Connect the Ground Wire
5.
Wire the communication cables.
Note: Separate communication cables from main circuit wiring and other electrical lines.
G
C
A
A1000
EtherNet_IM_E_conditional.fm 29 ページ ２０１２年１１月５日 月曜日 午前１１時３９分