Yaskawa Σ-II Series - Manual (Page 3)

1 Introduction
E-1
1 Introduction
This safety precautions manual covers Σ-II series SERVOPACK controlling Σ-II series AC ser-
vomotor. To properly use the Σ-II series SERVOPACK, read this safety precautions manual and
user’s manual (see the following table) thoroughly, and retain for easy reference for inspections
and maintenance, and so on. Make sure that these manuals reach the end user.
2 Reference Manuals
This table lists related reference manuals:
3 General Precautions
The following describes general precautions. Note the following to ensure safe application.
• The drawings presented in this manual are sometimes shown without covers or protec-
tive guards. Always replace the cover or protective guard as specified first, and then
operate the products in accordance with the manual.
• The drawings presented in this manual are typical examples and may not match the
product you received.
• This manual is subject to change due to product improvement, specification modifica-
tion, and manual improvement. When this manual is revised, the manual code is
updated and the new manual is published as a next edition. The edition number appears
on the front and back covers.
• If the manual must be ordered due to loss or damage, inform your nearest Yaskawa rep-
resentative or one of the offices listed on the back of this manual.
• Yaskawa will not take responsibility for the results of unauthorized modifications of this
product. Yaskawa shall not be liable for any damages or troubles resulting from unau-
thorized modification.
SERVOPACK
Model
Manual Titles Manual No.
SGDH Σ-II Series SGM†H/SGDH User’s Manual SIEPS80000005
SGDM Σ-II Series SGM†H/SGDM User’s Manual SIEPS80000015