Yaskawa AOI - Manual (Page 10)

2.
Define a tag for the AOI.
Click on the “?” next to the “...” button on the tag for which the AOI should be assigned.
Figure 7 Define the Tag
Note: The assigned tag name will be used throughout the program and should reflect the application. For example, the name
“Chilled_Water_Pump_01” would be appropriate for an application where the drive operates a chilled water pump.
In this procedure, the example assigned name will be “AOI_Name” as shown in Figure 8 .
When the tag assigned to the AOI does not exist, proceed to Step 3 to create a new variable.
If the tag assigned to the AOI already exists, skip to Step 5.
Figure 8 Assign the Tag Name
4 Setting Up the AOI
10 YASKAWA TOEP YAICOM 21A Logix Add-On Instruction (AOI) User Guide