Yaskawa G5 Traverse Control - Manual (Page 3)

Date: 07/01/04, Rev: 04-07 Page 3 of 7 TM.G5SW.005
1.0 Wiring
Wire the incoming power, motor, and accessories and control wiring as specified in the GPD515
Technical Manual TM4515.
2.0 I/O Definitions
2.1 New Multi-Function Digital Input Settings
For Parameters H1-01 through H1-06.
Addition to Table 5-2 Multi-Function Input Terminal Data Settings (Section 5.32)
(2)
Data Function Description Availability
80 Disturbed Waveform
Off
Open = Disturb function enabled
Closed = Disturb function disabled V/f Only
2.2 New Multi-Function Digital Output Settings
For Parameters F5-01, F5-02 and H2-01 through H2-03.
Addition to Table 5-3 Multi-Function Output Terminal Data Settings (Section 5.33)
(2)
Data Function Description Availability
40 Disturb – Up Status Closed during the accelerating period
when Disturb function is enabled V/f Only
41 During Disturb Closed when Disturb Function is
Active V/f Only
2.3 New Multi-Function Analog Input Settings
For Parameters H3-05 and H3-09.
None.
2.4 New Multi-Function Analog Output Settings
For Parameters F4-01, F4-03, H4-01 and H4-04.
None.
(2)
GPD 515 Technical Manual TM4515