Yaskawa Remote Display Controller LAN Node PCB for use with Microtrac DSD LAN - Manual (Page 12)

12
LED STATES
The LED on the RDC is used to indicate the operating status of the RDC.
RDC OPERATING
LED STATE STATUS
On, steady Power is applied, and
the RDC software is
executing.
On, blinking Power is applied, the
RDC software is
executing, and the
RDC is receiving LAN
messages.
Off Power is not applied, or
power is applied and the
RDC has experienced a
fault and has halted
execution.
RD 790-20