Startup – Yaskawa LEGEND-MC User Manual
Page 9
Advertising
3
LEGEND-MC Installation Guide
Startup
Mounting the LEGEND-MC to the LEGEND Amplifier
1.
Insert the lower two mounting notches of the LEGEND-MC into the
mounting holes at the bottom of the right side of the LEGEND.
2.
Push the LEGEND-MC in the direction indicated by the arrow in the
figure below, and insert the upper mounting notches of the LEGEND-
MC into the upper mounting holes on the right side of the LEGEND.
Mounting Orientation
Mount the LEGEND-MC and LEGEND vertically for proper cooling, as
shown below. Allow a minimum spacing of 10mm around the left and right
sides and 30mm around the top and bottom of the LEGEND-MC/LEGEND
unit.
Advertising