Yaskawa MP2600iec - Manual (Page 23)

5.1 Switch Settings
21
5 DIP Switches
5.1 Switch Settings
S11
DHCP
EINIT
CNFG
INT
SUP
STOP
NO
Switch Name Setting Operating Mode
Setting for
Normal
Operation
Details
1 STOP
ON
User program execution
inhibited
OFF Inhibits user program execution
OFF Normal operation
2 SUP
ON
Firmware programming
mode
OFF
Enables controller firmware programming.
(See Section 11)
OFF Normal operation
3 INIT
ON
SRAM/clock initialization
and configuration bypass
mode
OFF
Set to ON to bypass the stored configuration
(e.g. in case of a configuration problem that
prevents controller startup) or to initialize the
SRAM contents and clock settings after
backup power has been lost (See Section
7.1).
OFF Normal operation
4 CNFG
ON Normal operation
ON Always set to ON
OFF
Do not set (reserved for
future use)
5 E-INIT
ON
Force Ethernet address
setting for Port A to
192.168.1.1 and Port B
to 192.168.2.1
OFF
Enables use of the default Ethernet
addresses
OFF Normal Operation
6 DHCP
ON
DHCP-configured IP
settings
OFF
Enables use of DHCP for IP setting
configuration
OFF
Manually-configured IP
settings