Yaskawa V1000 Option - DI-100 120 Vac Interface - Manual (Page 9)

YASKAWA ELECTRIC TOEP YEAOPT 03 - V1000 Option DI-100 120 Vac Interface Installation Manual 9
3 Receiving
3 Receiving
Please perform the following tasks after receiving the option.
• All equipment is tested against defects at the factory. Immediately report any damages or
shortages evident when the equipment is received to the commercial carrier who
transported the equipment.
• Verify receipt of the correct model by checking the information on the nameplate (see
Figure 1 ).
• If you have received the wrong model or the option does not function properly, contact
your supplier.
◆
Contents and Packaging
Table 2 Option Package Contents
◆
Tool Requirements
A flat blade screwdriver (#1) with a blade thickness of 0.4 mm or less and a blade width of
2.5 mm or less is required to install the option.
Description:
DI-100 120 Vac Interface Card
UTC000400
DI-100 Installation Manual
_
Quantity: 1 1
MANUAL