Yaskawa AC Drive-A1000 - Manual (Page 8)

3 Application Selection
8 YASKAWA TM.A1000SW.029 Traverse Application A1000 Custom Software Supplement
‹ Control Modes, Symbols, and Terms
The table below lists terms and symbols used in this section to indicate which parameters are available in which control
modes.
Description
Parameter is available in all control modes.
Parameter is available when operating the drive with V/f Control.
Parameter is available when operating the drive with V/f with PG Control.
Parameter is available when operating the drive with Open Loop Vector.
Parameter is available when operating the drive with Closed Loop Vector.
Parameter is available when operating the drive with Open Loop Vector for PM monitors.
Parameter is available when operating the drive with Advanced Open Loop Vector for PM monitors.
Parameter is available when operating the drive with Closed Loop Vector for PM monitors.
All Modes
V/f V/f
V/f w PG V/f w PG
OLV OLV OLV OLV
OLV CLV
V/f w PG OLV/PM
V/f w PG AOLV/PM
CLV/PM