iSys iTerra Elite Color LED Printer - Manual (Page 29)

PAGE 29 --- Auto Stacker User Guide © 2008. All Rights Reserved. iSys-The Imaging Systems
Group Inc.
7.2 BUTTONS
RESET = Reset stacker - usually after an error condition or stacker full.
UNLOAD = No function.
*NOTE:
To use these buttons you must press and hold for 2 seconds.
7.3 STACKER BOOTUP SEQUENCE
Step 1:
Cycle though once, Flashing
• Green LED 1x
• Yellow LED 1x
• Red LED 1x
Step 2: Flash Green LED for the Microcode Revision.
Step 3: Flash Yellow LED for the Printer Type.
Step 4: Green LED on solid. Stacker ONLINE.