iSys V36 - Manual (Page 2)

COPYRIGHT NOTICE
This document is copyrighted by The Imaging Systems Group, 1998. No
part of this publication may be reproduced, transmitted, transcribed, or stored
in a retrieval system of any kind without prior written permission of The Imaging
Systems Group.
TRADEMARKS AND REMARKS
All trademarks used in this document are the property of their respective
owners.
Centronics is a U.S. registered trademark of Centronics Data Computer
Corporation.
Versatec is a registered trademark of Versatec Corporation.
DISCLAIMER
The vendor makes no representations or warranties with respect to the contents
hereof and specially disclaims any implied warranties of merchantability or
fitness for any purpose. Further, the vendor reserves the right to revise this
publication and to make changes from time to time in the contents hereof
without the vendor’s approval in writing.
ATTENTION: The V36 plotter generates, uses and can radiate radio fre-
quency energy and, if not installed and used in accordance with the instruction
manual, may cause interference to radio communications. It has been de-
signed to comply with the requirements for Class A computing devices pursu-
ant to Sub-part J of part 15 of FCC Rules, which are designed to provide
reasonable protection against such interference when operated in a commercial
environment. Operation of this equipment in a residential area is likely to
cause interference in which case, the user, at his own expense, will be required
to take whatever measures may be required to correct the interference.
iii