LeMond RevMaster Pro - Manual (Page 14)

Pg. 12
RevMaster Service Manual
MAINTENANCE SChEDULE
)
PArt recommended Action Frequency cleAner lubricAnt
1 Pedals Ensure that the pedals are tight
in crank arms; that all screws on
pedals are tight; and that the
pedal straps are not frayed
Before each use N/A N/A
Frame Wipe down Daily Soap & water; or, di-
luted non-abrasive
cleaning solution
N/A
Flywheel Wipe down Weekly WD-40® spray .
Spray on rag &
apply light coat to
sides of flywheel .
N/A
Crank Bolts Inspect for looseness Weekly N/A If loose, remove bolt,
apply Loctite® 242
on bolt threads and
reinstall . Tighten to 48
ft-lbs or 575 in-lbs
Brake Pad Inspect for excessive wear or a
dry leather brake pad
Weekly N/A 2 Use 3-IN-One® oil or
10W oil *Do not use
silicone-based lubri-
cants
Belt Inspect for correct tension;
replace cracked, frayed, or oth-
erwise non-uniform belt
Monthly N/A N/A
Bottom
Bracket
Inspect for side-to-side play in
spindle, and a grinding feeling
in crank area when pedaling .
If necessary, replace bottom
bracket .
Monthly N/A N/A
1 . We do not recommend you attempt to service the internal parts of the pedals . If they are found to be
worn internally, we recommend replacing the pedal .
2 . Use of lubricants or cleaning solutions other than those so specified will result in diminished perfor-
mance and a shorter life span for that part .