LinPlug relectro - Manual (Page 20)

Output Section
relectro has quite a comprehensive output section, including a combined
high-pass and low-pass filter with resonance, a chorus effect and dials for
wet and effects amount (more about the difference of these two soon) and
of course a volume dial.
Like the input section, the output section works on a conventional way on
the audio stream that went previous through input and main processing
section. We chose both filter and chorus as they are particularly useful to
fine-tune the audio created by the main processing.
The filter offers you for each part a
CUT=cutoff and RES=resonance control
like you know them from most subtractive
synthesizers. The filter type is fixed to a 12
dB high-pass and 12 dB low-pass type
respectively.
With the CUT=cutoff you adjust the
operation frequency, which means the high-
pass is only letting pass frequencies higher
than its operation frequency and the low-
pass is only letting pass frequencies lower
than its operation frequency.
With RES=resonance you can adjust the
additional emphasis around the operation
frequency.
LinPlug relectro user manual Page 20