LinPlug relectro - Manual (Page 25)

ECS (MIDI Learn)
ECS means Easy Controller Setup, also called “MIDI Learn”. This section
makes it simple to control the LinPlug relectro from an external MIDI
controller (either hardware or software). All you have to select Learn from
the ECS menu, select a LinPlug relectro parameter with the mouse and
finally send some MIDI messages from you MIDI source. That's all there is
to do!
From now on you can change the parameter with that controller. You can
define up to 128 parameter-controller-
combinations. This does not depend
on the type of controller you have nor
the particular MIDI Control Change
messages it sends.
ECS settings are save automatically,
but can be saved and restored
manually using the Load and Save
functions from the menu. A single
controller assignment can be cleared
using the Clear menu entry and move
controls that you wish to be cleared
(de-assigned from MIDI CC's).
The Clear All function clears all
controller assignments at once.
Don't forget to switch Off the ECS
after you have finished making or
clearing assignments!
LinPlug relectro user manual Page 25