Epson EQUITY 386SX/16 PLUS User Manual

Page 148

Advertising
background image

Align the connector with the socket so that the row in

the connector with the blocked hole lines up with the

row in the socket with the missing pin, as shown below.

Make sure the holes fit over all the pins and then push in
the connector.

Caution

If you do not correctly align the holes with the pins,

you could severely damage your hard disk drive when
you push in the connector.

2.

Place the hard disk drive on top of the subassembly with

the mounting plate facing up.

B - 1 4

Installing and Removing Disk Drives

Advertising