Epson EQUITY 386SX/16 PLUS User Manual

Page 195

Advertising
background image

If you select

Log errors

on

d i

s

k,

the program displays

this submenu:

Floppy disk

A:

Floppy disk B:

Hard disk C:

Hard disk D:

(You do not see drive D unless you have a second hard disk

drive.) Press or to highlight the disk on which you want

to log the error messages and press

Enter.

The program

creates a file called ERROR.LOG in the current directory of

the specified disk drive. After running the tests, you can open

the ERROR.LOG file to review the errors that occurred during
the tests.

The program uses this device for error logging until you

change it or indicate you do not want error logging. When

you specify a new device, the program erases the existing

ERROR.LOG file, if any.

When you specify the device for error logging, one of these

error messages may appear:

Floppy disk

A

not present

Floppy disk B not present

Hard disk C not present

Printer port not present

Serial port not present

Error in printer status

Error in serial port status

Error in floppy drive A

Record the error message and select a different device for
error logging.

Once you set the run time parameters, you are ready to select

the test(s).

Performing System Diagnostics

C-7

Advertising