Casio DT-900 - Manual (Page 46)

E-48
Using the Charger Unit
1 AC adaptor jack For connection of the AC adaptor to supply power
2 Nose Guide Remove this guide when you are using the down-facing reader
port model.
3 Data Collector detection switch Detects whether or not the Data Collector is mounted correctly on
the Charger Unit.
4 Battery pack charge indicator Indicates the charge status of the spare battery pack.
Off:
Not charging, or a battery pack problem
Lit Red: Charging (charging standing by when the battery in the
Data Collector is charging)
Lit Green: Charging complete
5 Charge indicator Indicates the charge status of the lithium-ion battery pack in the
Data Collector.
Off:
Not charging (e.g. lithium-ion battery not loaded in Data
Collector) or a battery pack problem
Lit Red: Charging
Lit Green: Charging complete
6 Power indicator Indicates whether power is ON or OFF, and if the Data Collector is
mounted.
Off:
Power OFF
Lit Red: Power ON, Data Collector not mounted
Lit Green: Power ON, Data Collector mounted
7 Installation covers (L, R) Hold down the charge/power supply terminals when the Charger
Unit is used as an installed type.
8 Charge/Power supply terminals Supplies power to the Data Collector mounted on the Charger
Unit.
9 Battery pack charge terminals Charges the spare battery pack separately.
10 Power switch Turns power ON and OFF.
11 Base Reverses the position of the base when wall-mounting the Charger
Unit.
12 Wall mounting hole Use this hole to attach the Charger Unit to a hook on a wall.