Casio PX-A800BN - Manual (Page 11)

English
Playing with Different Tones
E-9
To apply chorus to a tone
1.
While holding down the FUNCTION button,
use the Chorus keyboard key to cycle
through the available settings.
• Each press of the Chorus keyboard key causes the
digital piano to beep according to which setting is
selected, as shown in the table below.
• Chorus
About DSP
DSP makes it possible to digitally produce complex
acoustic effects. The DSP is assigned to each tone
whenever you turn on Digital Piano power.
Your Digital Piano comes equipped with three pedals:
damper, soft, and sostenuto
Pedal Functions
z Damper Pedal
Pressing the damper pedal while playing causes notes
you play on the keyboard to be sustained (continue to
play) longer.
• When GRAND PIANO is selected as the tone, using
this pedal generates harmonic and other resonance,
just like the damper pedal on an acoustic grand
piano.
z Soft Pedal
Pressing this pedal while playing suppresses notes
played on the keyboard after the pedal was pressed,
and makes them sound softer.
z Sostenuto Pedal
Only the notes of the keys that are depressed when this
pedal is pressed are sustained until the pedal is
released.
NOTE
• If pressing the pedal does not produce the desired
effect, it could mean that the pedal cord is not
connected properly. Refer to step 1 under “To
connect the cable” (page E-43).
Number of Beeps Setting
1 (long)
1 (short)
2
3
4 Off (OFF)
Light Chorus
Medium Chorus
Deep Chorus
Flanger (whooshing effect)
Chorus
Using the Digital Piano’s
Pedals
Soft pedal
Damper pedal
Sostenuto pedal
PXA800_e.book 9 ページ ２０１３年６月１８日 火曜日 午後６時１８分