Casio SE-C3500 Manual - Manual (Page 108)

E-108
Advanced programmings and registrations
„ Other clerk settings
Step Operation
1
Turn the Mode switch to PGM position and select [System
Setting] then press F key.
> ▪▪▪▪▪ >F
2
Enter 3 and press o key to set the register in the
programming mode.
3o
3
Enter 2 -digit clerk number followed by 07. The “07” is the
identification code for further program of clerks. Then press
o key. The example on the right is for programming to
clerk number 10.
1007o
(Clerk no.)
4
Referring the following tables, input the set code you wish
to program and press o key. The example on the right
is for setting a commission rate.
68o
(set code)
5
Enter the program code and press F key. The ex-
ample on the right is for setting 8.5% to commission rate 1
and 5% to commission 2.
08500500F
(program code)
6
If you wish to set the same program to the next clerk
number, perform the step 5 again. when you set to another
clerk (not next clerk number), repeat steps 3 through 5.
7
Press o key to complete the settings. o
Set code 67 (Training mode)
Description Selection Program code
Training mode No = 0
Yes = 1
B
D6
Must be “00000” ººººº
D5 D4 D3 D2 D1
Example 1: To set the clerk number 15 as a clerk being trained.
Press 3o1507o100000Fo
Set code 68 (Commission rates)
Description Selection Program code
Commission rate 1 (integer) 00 to 99 BB
D8 D7
Commission rate 1 (decimal) 00 to 99 BB
D6 D5
Commission rate 2 (integer) 00 to 99 BB
D4 D3
Commission rate 2 (decimal) 00 to 99 BB
D2 D1