Casio SE-C3500 Manual - Manual (Page 110)

E-110
Advanced programmings and registrations
Programming auto operation of <Arrangement>
By using allocated <Arrangement> key, programmed operations are performed
automatically just by pressing <Arrangement> key. The following explains to set
the automatic operations.
Step Operation
1
Turn the Mode switch to PGM position and select [System
Setting] then press F key.
> ▪▪▪▪▪ >F
2
Enter 3 and press o key to set the register in the
programming mode.
3o
3
Enter 4- digit record number followed by 38. The “38” is the
identification code for arrangement programming. If you
enter “0000”, the register serches a vacant record number.
Then press o key.
000038o
This example is for searching a vacant ar-
rangement program number.
4
Press <Arrangement> key.
<Arrangement>
5
Input 6-digit arrangement arrangement number and press
F key.
BBBBBBF
(Arrangement no.)
6
Input keys you wish to program automatic operations and
press <Arrangement> key.
12x50!F
For programming to register a dozen of •0.50
dept. 01 item.
7
Press <Arrangement> and o keys to complete the
program.
<Arrangement> o