Casio SE-C3500 Manual - Manual (Page 109)

E-109
Use
ful
fe
atu
re
s
Advanced programmings and registrations
„ Programming set menu
This program sets the menu number and sub items’ (included in the menu) PLU
number. You can set up to 15 items in a set menu.
Step Operation
1
Turn the Mode switch to PGM position and select [System
Setting] then press F key.
> ▪▪▪▪▪ >F
2
Enter 3 and press o key to set the register in the
programming mode.
3o
3
Enter 2 -digit set menu number followed by 28. The “28” is
the identification code for setting menu programming. Then
press o key.
1028o
This example is for programming set menu
number 10.
4
If you wish to use allocated flat PLU, proceed to step 5. If
you use normal PLU, enter 4- digit PLU number of an item
included in the menu and press
PLU/
S.DEPT
key.
0012
PLU/
S.DEPT
This example is for setting PLU 0012 in the
menu.
5
If you wish to use allocated <flat PLU> key, press <Flat
PLU> key. If you use shifted flat PLU, press @ and <Flat
PLU> keys.
( @ ) <Flat PLU>
6
Press F key. If you wish to set another item in the
menu, preform the step 4 or 5. To set another menu, repeat
the steps 3 through 5.
F
7
Press o key to complete the settings. o