Epson 440 - Manual (Page 120)

Loading Envelopes
When printing on envelopes, please note the following:
❑ You can load up to 10 envelopes into the sheet feeder.
❑ Load envelopes flap edge first with the flap side down, as
shown below.
❑ Do not use envelopes that are curled or folded. Also avoid
using envelopes that are too thin; they may curl during
printings.
❑ Select Plain Paper as the Media Type setting in the printer
driver. For more details on making printer driver settings,
see online help for Windows, or Chapter 6 for Macintosh.
❑ If ink smears on your documents, set the adjust lever to the
”+” position. To change the setting, open the printer cover
and reposition the lever. See the illustration on page 7-6.
Note:
Return the adjust lever to the “0” position, which is the normal
position, after you finish printing on envelopes. Leaving the lever
in the “+” position may cause the printed image to have gaps on
other media.
e22-e2
L
Easter2 Ref. Guide
Rev.b
A5 size Chapter 7
05-20-97 DR, pass 0
7-6 Printing on Special Paper