Easter2 ref. guide rev.b – Epson 440 User Manual

Page 13

Advertising
background image

❑

Once you install an ink cartridge, do not open the clamp or
remove the cartridge except to replace it with a new one.
The cartridge may become unusable otherwise.

❑

Install the ink cartridge immediately after you remove it
from its package. Leaving the cartridge unpacked for a long
time before use may result in reduced print quality.

❑

Do not use an ink cartridge beyond the date printed on the
cartridge carton. For best results, use up the ink cartridges
within six months of installing them.

❑

Do not shake an ink cartridge; this can cause leakage.

❑

Always turn the printer off using the

2

power button.

When this button is pressed, the

2

power light flashes

briefly then goes out. Do not unplug the printer or turn off
the power to the outlet until the

2

power light is off.

❑

Before transporting the printer, make sure the print heads
are capped in the far right position and the ink cartridges
are in place.

E

NERGY

S

TAR Compliance

As an

E

NERGY

S

TAR Partner, EPSON has

determined that this product meets the

E

NERGY

S

TAR guidelines for energy efficiency.

The International

E

NERGY

S

TAR Office Equipment Program

is a voluntary partnership with the computer and office
equipment industry to promote the introduction of
energy-efficient personal computers, monitors, printers, fax
machines, and copiers in an effort to reduce air pollution
caused by power generation.

R

Easter2 Ref. Guide
Rev.b

A5 size

Introduction

05-20-97

DR, pass 0

Safety Instructions

3

Advertising