Epson 440 - Manual (Page 27)

Attaching the Paper Support
Insert the paper support into the slots at the rear of the printer
as shown below.
Note:
To print on transparencies, you need to reposition the paper support
as described in “Loading Transparencies” in Chapter 7.
Choosing a Place for the Printer
Follow the guidelines listed below when placing your printer.
❑ Place the printer on a flat, stable surface. The printer will
not operate properly if it is tilted or at an angle.
❑ Place the printer close enough to the computer for the
interface cable to reach it easily.
❑ Leave adequate room for easy operation and maintenance.
❑ Leave enough room on the table at the front of the printer
to lower the output tray.
!e29-1
2
R
Easter2 Ref. Guide
Rev.b
A5 size Chapter 2
05-28-97 DR, pass 3
Getting Started 2-3